Workshop manuals for all Toyota Camry models. 2AZ-FE Engine 2.4L 1MZ-FE Engine (V6). Toyota Camry XV40 Workshop Manual Years. The Toyota AZ engine family is a straight-4 piston engine series. The 2AZ-FE engine in the 2007-2009 Camry may burn excessive oil and is involved in this lawsuit. AMSOIL Products for the 2006 TOYOTA CAMRY (2.4L 4 -cyl Engine Code 2AZ-FE 4). 2006 TOYOTA CAMRY 2.4L 4 -cyl Engine 2AZ-FE. For Manual Transmission.

Toyota AZ engine Overview Production 2000–2012 Chronology Predecessor Successor The AZ engine family is a series. The AZ series uses an aluminium engine block with cast iron cylinder liners and aluminium cylinder heads.

The engine series features many advanced technologies including slant- combustion chambers, offset cylinder and crank centers, and the continuously variable intake valve timing system. The aluminium engine measures 626 mm (25-in) long, 608 mm (24-in) wide, and 681 mm (27-in) tall. The cylinder block is an open-deck, midi-skirt die-cast aluminium type with cast-in iron liners and a die-cast aluminium lower crankcase and a stamped oil pan. The forged steel crankshaft is fully balanced with eight counterweights and supported by five main bearings. A helical gear pressed in No. 3 counterweight drives twin contra-rotating balance shafts in the shaft housing within the lower crankcase.

The dual overhead camshafts are driven by a single-stage roller chain of 8.0 mm (0.3-in) pitch, enabling a narrow included valve angle of 27.5°. The camshafts act on four valves per cylinder via bucket tappets. As in the recent Toyota engine practice, no clearance adjusting shim is employed. Valve diameters are 34.0 mm (1.3 in) for intake and 29.5 mm (1.2 in) for exhaust, with 8.0 mm (0.3-in) lift for both intake and exhaust. The four-vane VVT-i device is fitted on the intake camshaft, altering timing by 50°.

The valve cover is made of magnesium to save weight. Fuel is injected sequentially via an ultra-fine-atomization injector with twelve small injection holes, each 0.18 mm (0.01 in) in diameter. As in the smaller NZ engine, the new AZ adopts a plastic, built-up, and vibration-welded intake manifold integrating a large volume plenum chamber (3.5 L (214 in 3) volume including a 1.3 L (79 in 3) resonator). Exhaust manifolds are of tubular construction with integrated catalytic converters.

The AZ is the replacement for the. Its successor is the. Contents • • • • • • • • Excessive Oil Consumption [ ] The 2AZ-FE engine in the 2007-2009 Camry may burn excessive oil and is involved in this lawsuit. Other engines are also affected.

If your Toyota engine is burning more than 1 quart of oil in 1200 miles, has less than 150k miles, and is less than 10 years old, Toyota service will perform a free oil consumption test to determine if your engine is affected. There are approximately 1,715,200 vehicles covered by this Warranty Enhancement Program. Bpms Community Edition Visual Studio. 1AZ-FE [ ] The 1AZ-FE is a 2.0 L (1998 cc) version. Output is 108 kW (145 hp) at 6000 rpm with 190 N⋅m (140 lb⋅ft) of torque at 4000 rpm for the Camry Aurion version. Rav4 and Ipsum engines were rated at 148–150 hp (110–112 kW) at 6000 rpm and 142 lb⋅ft (193 N⋅m) of torque at 4000 rpm. The 1AZ has a total displacement of 1998 cc with 86.0 mm (3.39 in) bore and 86.0 mm (3.39 in) stroke, and a compression ratio of 9.6:1. Applications: • 2006–2009 ( version) • 2000–2003 • 2003-2006 Toyota RAV4 Euro • 2001–2009 1AZ-FSE [ ] The 1AZ-FSE is a 2.0 L (1998 cc) version.